Racks and pull-up bars - Bodytone

135 x 136 x 214cm

119kg

High-strength 3mm steel tube, laser-cut for greater precision, and welded using a robotic process.

Different anchoring positions in the structure.

7 coats of paint. 3 layers of protection and 4 layers of paint. Pickled and stabilized steel by total immersion of the parts in different degreasing solutions to guarantee a perfect and complete cleaning of the base material. Anti-rust primer to ensure proper isolation of internal oxidation and good paint adhesion. 2 final coats of epoxy polyester powder paint, dried at 240ºC.

Study of biomechanics and ergonomics under the supervision of associated professionals and athletes. After a long design period; From the sketch, engineering research, prototype production, testing by professional athletes, our products go to market.

Moving parts in ST52 steel beveled, calibrated and machined. Superior grip for pull-ups.

207 x 175 x 121cm

55kg

High-strength 3mm steel tube, laser-cut for greater precision, and welded using a robotic process.

Leather upholstery, resistant to perspiration, antiallergic and antibacterial, with special high-density foam interior.

7 coats of paint. 3 layers of protection and 4 layers of paint. Pickled and stabilized steel by total immersion of the parts in different degreasing solutions to guarantee a perfect and complete cleaning of the base material. Anti-rust primer to ensure proper isolation of internal oxidation and good paint adhesion. 2 final coats of epoxy polyester powder paint, dried at 240ºC.

Study of biomechanics and ergonomics under the supervision of associated professionals and athletes. After a long design period; From the sketch, engineering research, prototype production, testing by professional athletes, our products go to market.

Moving parts in ST52 steel beveled, calibrated and machined.

189 x 175 x 144cm

72kg

High-strength 3mm steel tube, laser-cut for greater precision, and welded using a robotic process.

Leather upholstery, resistant to perspiration, antiallergic and antibacterial, with special high-density foam interior.

7 coats of paint. 3 layers of protection and 4 layers of paint. Pickled and stabilized steel by total immersion of the parts in different degreasing solutions to guarantee a perfect and complete cleaning of the base material. Anti-rust primer to ensure proper isolation of internal oxidation and good paint adhesion. 2 final coats of epoxy polyester powder paint, dried at 240ºC.

Study of biomechanics and ergonomics under the supervision of associated professionals and athletes. After a long design period; From the sketch, engineering research, prototype production, testing by professional athletes, our products go to market.

Moving parts in ST52 steel beveled, calibrated and machined.

150 x 177 x 232cm

285kg

Adjustable safety stops at different heights.

110x52 mm steel tube, 3 mm thick, welded according to UNE EN 10219, quality S-275-J0H. Enriched and optimized to maintain a constant section in the bending process, avoiding fragile areas with a low rate of breakage. Cold bending process using a 4-roller system avoiding deformation in the process, maintaining its physical characteristics throughout the piece.

3 coats of paint. Pickled and stabilized steel by total immersion of the pieces in different degreasing solutions to guarantee a perfect and complete cleaning of the base material. Antioxidant primer to guarantee adequate isolation of internal oxidation and good paint adhesion. 2 final coats of epoxy polyester powder paint, dried at 240º.

Study of biomechanics and ergonomics under the supervision of associated professionals and athletes. After a long period of design: from the sketch, engineering research, prototype production, testing by professional athletes, our products go on the market.

Perimeter closed at structural points and connection plates.

10 mm plate-to-plate system to avoid play and torsion in areas of maximum effort. An ergonomic and biomechanical study to optimize each exercise.

Disc supports in burnished steel, which provides more stability to the machine. Turned aluminum top. Hardness of the screws of 10.9. Adjustment system by means of a single bolt, made of techno-polymer with a breaking index of 750 kg. Platform for the support of the feet made of non-slip Aluminum. 4 non-slip rubber bases.

150 x 177 x 232cm

215kg

Adjustable safety stops at different heights.

110x52 mm steel tube, 3 mm thick, welded according to UNE EN 10219, quality S-275-J0H. Enriched and optimized to maintain a constant section in the bending process, avoiding fragile areas with a low rate of breakage. Cold bending process using a 4-roller system avoiding deformation in the process, maintaining its physical characteristics throughout the piece.

3 coats of paint. Pickled and stabilized steel by total immersion of the pieces in different degreasing solutions to guarantee a perfect and complete cleaning of the base material. Antioxidant primer to guarantee adequate isolation of internal oxidation and good paint adhesion. 2 final coats of epoxy polyester powder paint, dried at 240º.

Study of biomechanics and ergonomics under the supervision of associated professionals and athletes. After a long period of design: from the sketch, engineering research, prototype production, testing by professional athletes, our products go on the market.

Perimeter closed at structural points and connection plates.

10 mm plate-to-plate system to avoid play and torsion in areas of maximum effort. An ergonomic and biomechanical study to optimize each exercise.

Disc supports in burnished steel, which provides more stability to the machine. Turned aluminum top. Hardness of the screws of 10.9. Adjustment system by means of a single bolt, made of techno-polymer with a breaking index of 750 kg. Platform for the support of the feet made of non-slip Aluminum. 4 non-slip rubber bases.