Weight bench Leg extension

153 x 157 x 115cm

135kg

310 mm supports for 6 Bodytone discs of 20 kg per arm (up to 240 kg for training).

Our machines are designed for a very wide spectrum of users, allowing their adjustment to adapt to different user heights, from approximately 150 to 200 cm.

110x52 mm steel tube, 3 mm thick, welded according to UNE EN 10219, quality S-275-J0H. Enriched and optimized to maintain a constant section in the bending process, avoiding fragile areas with a low rate of breakage. Cold bending process using a 4-roller system avoiding deformation in the process, maintaining its physical characteristics throughout the piece.

3 coats of paint. Pickled and stabilized steel by total immersion of the pieces in different degreasing solutions to guarantee a perfect and complete cleaning of the base material. Antioxidant primer to guarantee adequate isolation of internal oxidation and good paint adhesion. 2 final coats of epoxy polyester powder paint, dried at 240º.

Study of biomechanics and ergonomics under the supervision of associated professionals and athletes. After a long period of design: from the sketch, engineering research, prototype production, testing by professional athletes, our products go on the market.

Perimeter closed at structural points and connection plates.

10 mm plate-to-plate system to avoid play and torsion in areas of maximum effort. An ergonomic and biomechanical study to optimize each exercise.

10 mm thick plates laser cut with another 10 mm thick plate to reinforce and achieve a smooth movement without play or twisting caused by continuous use or load.

SFK double tapered roller bearing, housed in a closed, anti-backlash bushing, ensuring a constant direction of movement.

Imitation leather resistant to perspiration, antibacterial and anti-allergen. Backrest, seat and rollers in EVA foam made with a unique mold that does not deform.

Anodized aluminium, knurled to improve grip.

Chrome seatpost adjustable in 8 positions and laser numbered.

Disc supports in burnished steel, which provides more stability to the machine. Turned aluminum top. Hardness of the screws of 10.9. Adjustment system by means of a single bolt, made of techno-polymer with a breaking index of 750 kg. Platform for the support of the feet made of non-slip Aluminum. 4 non-slip rubber bases.