hip thruster

146 x 201 x 79cm

157kg

310 mm supports for 8 Bodytone records of 20 kg per arm (up to 280 kg for the drive).

Our jukeboxes are designed for a very wide range of users, allowing them to be adjusted to different user heights, from around 150 to 200cm.

Steel tube 110x52 mm, 3 mm thick, welded according to the UNE EN 10219 standard, quality S-275-J0H. Enriched and optimized to maintain a constant section in the bending process, avoiding fragile areas with a low rate of breakage. Cold bending process using a 4-roller system that prevents deformation of the process, maintaining its physical characteristics throughout the piece.

3 coats of paint. Pickled and stabilized steel by total immersion of the parts in different degreasing solutions to guarantee a perfect and complete cleaning of the base material. Anti-rust primer to ensure adequate insulation against internal oxidation and good paint adhesion. 2 final coats of epoxy polyester powder paint, drying at 240º.

Study of biomechanics and ergonomics under the supervision of associated professionals and athletes. After a long design period: from sketches, to engineering research, to prototype production, to testing by professional athletes, our products are on the market.

Closed perimeter at structural points and connection plates.

10mm plate-on-plate system to prevent loosening and twisting in areas of maximum stress. An ergonomic and biomechanical study to optimize each exercise

10 mm thick plates laser cut with another 10 mm thick plate to reinforce and achieve a smooth movement without play or twisting caused by continuous use or load.

The SFK double tapered roller bearing in a closed, clearance-free sleeve ensures a constant direction of movement.

The imitation leather is resistant to sweat, antibacterial and antiallergic. The back, seat and wheels in EVA foam with a single non-deformable mould.

Sliding and depth adjustment on chrome steel guides by means of a lever mechanism.

Base for the feet adjustable in inclination in 4 positions by means of a locking pin. Non-slip aluminum foot support platform

Burnished steel disc supports, which give the machine more stability. Turned aluminum top. Screw hardness of 10.9. Adjustment system by means of a single bolt, made of technopolymer with a breaking rate of 750 kg. 4 non-slip rubber bases. Included with 4 rubbers of different degrees of hardness.